not much for a good rear actually... it adds up quick when you have a shop do the work too $300 for two 8.8 rears from the junk yard another $300...
95-01 ford explorer mine is actually out of a 98 mercury mountaineer... same thing... the second one is just for the short side axle cut the...
How do you move a truck with no suspension off a lift...???:shrug: Skates!:eek: it's a 16 wheeler now!:looney: LOL! Here are some pics moving...
love the ls400 conversion... great budget setup... it's still a single piston floating caliper though... bet I would overheat them quick......
Nice pic! So the mustang? calipers just bolt up? and that is a stock 10" rotor no? not really been able to follow what you've done? As for...
been reading your thread... and wondering how your going to bolt on those calipers? Awesome! Thanks Lit! Thats more what I had in mind but...
Looking for opinions on what rotor and calipers setup to make a new set of caliper stands for...??? I just got a set of drop spindles and can...
Being fragile I will have to pack them well... Last pair of caliper stands I had went to HI... cost about $20... They were smaller but heavy.....
Here are my old wheel adapters up for sale on ebay if you win em and say you saw this I'll knock off $5!:waytogo:...
Which side? I know I have one maybe both... not sure you can have it for shipping costs if you want it... or both... I'll look to make sure but...
not too likely to ford the motor... probably go 5.3 gen4 gm but Ill keep it in mind since i have considered the 5.0 or 5.4 since the distributor...
Come on guys nobody knows the pinion angle??!!
I am in the middle of swapping in a new rear axle and need to know what the pinion angle is on our trucks? Should I change it since I am running...
about time someone made that rear window bigger! what glass are you using for it? nice work!!
that's odd... i didn't have to make any mods like that to install buckets from a 4runner or truck where my bench seat was... the bench uses only...
there was one on ebay for $65... should still be there
I am sure it is out there but for me it was like finding that pervebial needle in a haystack... too much conflicting info on the net...:eyecrazy:...
I am about to go pickup my 8.8 3:73 posi ford rear so thanks for the write up! I am wondering how much it is wider when it really is on the...
ok so here is a really bad paintshop job on a couple of photos I stole off the net... since an xtracab on this gen truck is so much bigger is...
Need the inner plates from a set of rear shackles... 1/2 offset about 3.5 inches hole to hole.... I am pretty sure they are the same 2wd or 4wd...
Separate names with a comma.
