Yeah, I found out the hard way too (the baking on when the engine is hot part, that is).
Yeah, ditto. I prefer to use engine cleaner (foaming type), brush for really caked on crap, and a gentle rinsing.
My 1988 long bed 2WD has a 17 gallon tank. Maybe a 17 gallon tank is too long for a short bed?
Yeah, I was studying my factory service manual and they show the different chassis configurations. The manual shows the RN75 frame with two...
Yeah, I think the chassis code is RN75. It's basically the long bed Xtra cab frame but with the standard cab and an even longer long bed.
I didn't want to hijack YotaMatt's introductory thread but his truck got me thinking, does anyone here have an extra long bed (8-foot) truck?
Why does the box say 80Hilux when it looks like an 89+? At the earliest, it would be an 88 outside of the US...
I would just have one, fuse protected, heavy duty wire to a fuse block and then indifvidual wires after their respective fuse to the component....
Yeah... I was at one point thinking how cool it would be to go to a four-link and so I was investigating all kinds of options. In fact, that...
Thanks! You guys saved me $400 today. :bowdown: :waytogo: Now all I need is to find a house to buy so I can work on my cars...
Thanks for the quick answer. :) Sounds like I may not have to bother, especially with the anemic power of the 22R :o I suppose the cheapest,...
Glad I did a search... :) I am planning to install 2" (most likely) or maybe 3" (if 2" is not enough) blocks on my stock 1988 longbed. Thanks...
If this is the first time you saw those shots, then you probably don't know about (but probably should if you like Celicas): Classic-Celica.com...
Don't even want to consider a cross-bed box? They have low profile ones now that are only 1~2inches above the bed walls. Or there are the "job...
Could be bad (weak) starter solenoid. Have your starter checked at Autozone/Pep Boys.
LOL... Your (to the OP) timing is so bad. You're also going miss this: Japanese Classic Car Show / JCCS 2013
I wouldn't cap it inside the air cleaner. If the cap fell off for whatever reason, it could get sucked into the carb. Just buy a black rubber...
Clean truck and engine compartment but I just noticed that the tube on the top of the air cleaner should be capped. Perhaps not very likely, but...
The section width (195, 205, 215, etc.) is measured at the sidewalls of the tire. I don't know if it is measured internally or externally at the...
Yup. Measuring from the inside bead to inside bead is the standard way to measure and advertise wheel width.
Separate names with a comma.
