That's what the gubmint weenies want you to believe. There is nothing magical about 55MPH. Your mileage will drop starting from 45MPH or even...
You don't flip the axle. If you did, you would have 5 reverse gears and one forward gear (would rotate backwards) and all the gear oil will drain...
The first generation of catalytic converters (catalyst coated pellets) were highly inefficient. I have a 1979 Celica from which I removed the CC...
Just wondering why so much offset? I did some eyeballing/estimating/calculating and it seems 20~25mm of offset would make the rears nicely...
LOL. You ever get in a race without knowing it? One day, I was running errands WITH MY MOM sitting next to me, in her Honda Accord EX. At a...
http://www.toyotaminis.com/forum/suspension-chassis-67/drop-spindles-4791/
What's even more amazing is that 73hiluxsemi can do an engine swap in the middle of the street! Where I live, with its Homeowners' Association, I...
For what they are (Centerlines, spun barrels, welded centers, high load capacity for an aftermarket wheels), the prices aren't too bad. I think...
You can't just take the zerk fittings off; the grease will squeeze out. Toyotas normally come from the factory with plugs, not zerk fittings....
Some Centerlines can be custom ordered with backspacing up to 5" = 25mm offset: http://centerlinewheels.com/sub_wheel.php?mw_id=35 When I am...
Anything is possible with enough time and money... Seems to me, the "easiest" way is to strip the entire ignition system related wiring from a...
I have a long bed even though I prefer short beds. But when you buy end-of-model-year leftovers, you don't have much choice. All that were left...
Not only should you have a pressure regulator, you should also have a oil pressure cutoff switch. The cutoff switch is a safety feature and will...
Why? Are you getting an electric dryer? (the correct answer is "yes") :D
Well, that sucks. I FINALLY found ONE at a store a couple of days ago but it was all chewed up. So I took the subscription card and was...
Man, you really have me thinking about doing this in the future. To the point I've been searching the forum for frame pics... :D Just need a...
I love this!! This is the first time I read this thread. Since these trucks just have a panel there, this is a cool idea. :waytogo:
Thanks for the help! Member here (Beefed Taco) sells a low-profile bumpstop through his website Streettacos. This is odd. Most tire shops...
Is this with just the 3" blocks in the rear? Or is it with the 3" blocks and the Beltech springs? And does your truck still have the rear...
The factory repair manual for my 1988 has chassis dimensions. The factory repair manual for 1989 might have the measurements you need.
Separate names with a comma.
