Not even a W58? How much is it going to cost to add a 5th gear? My automatic to manual conversion cost me $1000 or less. I even used a W4x series...
The ignitor is bolt down to the truck's left wheel well.
water in your distributor.
If you want the STI wheels to sit where those Z wheels fit on SD Yota's truck, you'll need 1" spacers.
2wd 1-ton torsions and sway bar up front with drop spindles drop leafs in rear with 4runner sway bar (will require some modding of course) upgrade...
GET IT DONE!! WOOOO! haha, I wish I could have a house and garage right now!
Good gawd that's a pretty 22!
Bro, how much did you pay for this? You just bought AZEV's with a nismo sticker. AZEV TYPE A CLASSICO HP
I think 18x8.5 with such a high offset of +55mm would bring it really close to inside and when you turn, you'll rub on that strut bar. This is...
damn, you should've hit up me and the xcab's at Nada!
Just running some fat 18x10's :waytogo:
whenever I get tires mounted, i always get rebalanced.
I believe 8.5 width with +55mm is gunna be roughly 20-23mm more sunken in than 18x8.5's rear wheels from a 350Z. That's relative.
everything turned out okay? LOL is that just spark plugs without the fuel running through?
I believe that shaving the blocks to "angle" them could help the pinion angle some. How about a sway bar? I know 4Runners have sway bars.
my ignitor wasn't bolted to my chassis and it didn't spark. Bolted it down and boom, insta start :D does it turn over and what not?
STI's are all 5x114.3. The wheels are a +55mm offset, that's going to be sunken in. As long it doesn't rub too much on the inside and bother you,...
Separate names with a comma.
