This truck was in my Safeway parking lot yesterday, not a Toyota but a very clean 71 Datsan[ATTACH] [ATTACH] [ATTACH]
I have a 88 with short trow shiftier from LC those use there's which are different from the stock parts,but look the same.
The old system works fine, the ECU was replaced once & a few of the sensors, of which I have an extra one . The presser sensors are effected by...
Yes it is!
So after running Airlifts first gen Auto Pilot for 10 years I decided to upgrade to there 3H which is now there newest system. A call to a long...
Did use that drive as figured it was matched to the gear radio of the W58. I run a adapter that changes from mechanical to electric & I can adjust...
Working on the front console now & than remove all the existing stuff & install the new,will go with the pressure senors first, test drive & than...
So after running an Air Lift Auto Pilot 1st gen for 10 years or so, I will be upgrading to their 3H system. I will have to modify the front...
Most lock sets there is a small hole into which you insert a pin ( paper clip or something round that fits)& turn the key to remove. But if the...
Goggle seach
Can not dye plastic,paint them. And the best rattle can paint is KAYLON FUSION. Remove all the pieces & prep them by sanding with 220 wet paper &...
Will be selling my manifolds I made with 8 ASCO 3/8'' nickel plated valves. These are the best valves out the , have all brass fittings, with...
Resize your photo's by 50%
Sounds like you have just the inner cylinder,you can replace just that if you can get the other out. Or pull the steering wheel & replace the...
Finally the NOISE IS GONE So the problem was in the trans & I got fucked over when I took into a shop ,& was told that tey installed a rebuild...
Telling you what I run,not selling anything! Pro street head comes with is engine & that is what you should get!!
LC complete stage1 engine with all they recommended, more than satisfied.
All painted & ready to go in[ATTACH]
Tail shaft case is changed out & all back together, have to paint & get back in truck[ATTACH]
Heat & gas?? For the fuel gauge I used the stock sender plate & fitted the Autometer sender with float. As for voltage, doesn't better how old, a...
Separate names with a comma.
