Na. Why the hell you runnin 2800s? I'm rockin 2500 airlifts on all 4 corners...
A piece of string and WD40 is all ya need.
Yes switching to 8 valves will fix it. 4 valves lets the air from the bag on the compressed corner escape to the other bag...
Welcome!!!
How does the collector clear on a bagged and bodied 89-95 body style? I want a header, but would hate to buy it and find it it hangs below the frame..
But ~4500 bucks for 30 hp? Ill pass. You can run a low boost supercharger on a stock engine, but they recommend a fuel management system. Run a...
I set mine at 7 and 11 with it cold. No ill effects, and its not dead silent, but not rickety tickety either.
4x4 fenders I'd say lol.
Very solid project foundation. Whatever you want to do with it I'm sure someone here can help! If ya wanna bag it and drag it...or just rebuild it...
Very nice..but one question. why are you running such a heavy oil?
One at back of engine isn't required. Mines off and no issues. I have one from batt to chassis big one from batt to block, an that's it.
I did open and split my loom. But there would have been like 30" of too much wire. So to make it clean, I just cut it, soldered , and heat shrunk...
PM'd ya mutunytattoo. Don't wanna clutter up UC93's thread.
Only thing I did differently is where the part bolts to the actual pedal....I used a 1/4" spacer with nylon washers on either side...it allowed me...
Check my build thread my friend. It's all in those pages. The trans hump cut..is not required.
I ended up putting the closed end of a wrench over the part of the tie rod end that goes into the spindle....thus creating a handle for...
get a non p/s box. they are geared differently
Company called URD makes a 02 sensor simulator for this very application. Had one on my lifted 96 with a 3RZ
Yes it does. Unless your body dropped you won't need to do this. There is no "cut in the front" Fender bolts to the core support and thats it...
Yep.
Separate names with a comma.
