This is where I bought mine, but many other sources around,...
I run a GM 140 amp on one and a 130 amp on the other rig, easy swap with a little trimming on the lower mount, and fabbing up the tensioner arm to...
I feel for ya, If its any consilation I,ve had 2 stolen, the first a really nice 87 SR5 Xcab 4x4 fully loaded, straight as an arrow, had a new...
If its an aftermarket electronic unit like a Rosta should be fine, if its a vacuum servo you'll need a vacuum storage tank, mine did.
Remove the nut in the center of the clutch hub, remove the belt, and it should slide off, might take a light tap from a SOFT hammer, its keyed on...
Wheres your battery located? if moved to the rear possibly battery cable to small or trigger wire to small causing too much resistance. Used to...
Decide what brand gauges you want to use, what size, which ones, placement, then see if you can fit it into some type of mounting plate and fit...
Not aware of any ready made bolt in clusters for the toys, you'll probably have to custom make your own layout, many choices available for digital...
I got my wife back :D She slipped and fell and busted her hip so got to spend 5 days in the hospital while they operated and put in a metal...
Thanks man, I would be interested in them, and will check on postage, Thanks again.
Your right, the oil sender has to be changed to the gauge type, the tach has to be wired to the coil/igniter under the hood, normally there is a...
You could tie in to any dash light wire that dims with the dimmer switch, heater panel light, OEM radio? I think it dims with the switch? gauge...
In the intake manifold plenum , if carbed, below the throttle plates and carb base, if EFI, in the plenum behind the throttle body.
Sounding good, best of luck with the build. Not sure if the tanks are the same or not and only require changing the pickup assembly to convert,...
I thought the early 20r didn't have any provision for the line, the later ones were capped off as the heater hose hooked to the bottom radiator...
Thanks Nuff, thats the picture I had visions of mine looking like :)
Glad I could help you out John, as long as your happy with the parts, thats what counts. My old parts stash is getting lower and lower :( but I...
Separate names with a comma.
