Look at the throttle lever on the carb, where the linkage connects from the foot pedal, the one you move back and forth to open the carb, it...
You could mount an inline on the frame rail next to the tank, on the side, on the top, or even on the bottom, if your gonna be layin frame, bottom...
Actually its a pressure relief valve, has no restriction either direction unless the line is plugged in the flow direction then it lets the fuel...
You could do the 134a conversion kit relatively easy and hope for the best, or spend a little extra and increase your success. The compressor...
Its possible the tach uses an LED bulb, which if the case doesn't dim like a normal bulb, its either on or off, tapping into one of the dash light...
Its not OEM by any means but I have the audiovox CS100 units on both my 75 and 76 and they work fine, the 75 I have a column mounted control...
I take it the fuses were blown and replaced? and still no power until you cobbled from battery to pump? What about the fusible links, should be...
Glad to hear your engine is running and your happy with it, thats all that counts. For what its worth and not trying to downgrade, just offering...
Its only half racey, the stripe just goes shortly over the top then fans out into the scallop design across the roof and down the sides and rear....
Bump!! :shrug: someones gotta need these, your forcin me to put them on my 77 pickup:D
Good luck man, wish you the best. Specs are to 22R? for what its worth, the specs depending on what your builder is reffering to are the same...
That won't really prove anything as both the 20R and early 22R used the same cam, dual timing chain setup ect. You do have a later model head as...
The hybrid is a early model pre 84 22R tall deck block with a 20R head, the benefit was it upped the compression by about 1/2 point and the small...
I'd be interested in the complicated story, as that would be the very first passenger side dipstick, 20R stamped 22R block I ever heard of or...
Separate names with a comma.
