Yup.
You can lower one end or both without any problems. That'd be better than removing it altogether. With it totally removed, you may notice...
Not sure yet. I did some tests with my Gopro and a few streamers behind the core to see what kind of air flow it sees. There wasn't much...
Just run the vacuum line straight from the regulator to any vacuum port on the intake. The rest of the lines and the solenoid that are in between...
I am interested though.
I have to see if the wiring is there for it to work in my truck. I don't think it is. And I have to figure out how to get MS to drive the tach.
You copyrighted your engine pic? :) Anyway, I've never heard of the pinging issue from removing the EGR and related stuff. I also ran with...
Did you check for voltage on that wire? It's typical to see a positive run from the alternator to the starter, then on to the battery. If it is...
It's not a ground.
You can even run 309 stainless wire for SS to SS or SS to mild steel welding with the 75/25.
75/25 here.
Merry Christmas! Hope you have a great day with your families guys. http://www.youtube.com/watch?v=bjk7nDxAUC4
You are always better off using bushing rod ends rather than metal on metal. Teflon coated rod ends are good for a dedicated offroad setup or...
I still swear by my 7 year old Yellow top.
That's one of the complications of me switching to a manual. I already have a custom trans crossmember that will need modified once again. And...
The more angle you can get on the triangulated links, the better. More angle allows the side load during turns to be transmitted into the chassis...
Yeah, I'm Ok with the idea if it comes to it. But, that being said, I found a friend of a friend today who owns a trans shop and is willing to...
Separate names with a comma.
