Does it do it all the time? Can you make it happen while sitting still? If so, get a buddy to rack the wheel back and forth and get under the...
Panhards on leafs are pretty common. Ford uses them on all the older F250-F350's. It just helps the suspension feel more planted.
For that matter, any of your old parts....
What are you doing with your old axle?
Theoretically, yes. Blow-by would be lost compression. Is it normal? Also yes. Even new rings won't seal perfectly, although gapless rings...
Or run a catch can. My turbo motor covered the entire bay before I installed the catch can.
I ran stock length with mine also.
With a decent set of drop springs, you won't need air shocks. As the load carrying capability will be somewhat close or better than stock. I ran...
Not sure if yours is the same as mine, but in the engine bay there's a relay box. If you take that apart, there are a few connections located...
Here's the thing though. The connections might be check good with a meter, but be bad with a current load. The only way to check them properly...
Welcome! Let's see some pics.
Make sure to check all the grounds too, make sure the connections are clean. A lot of these phantom issues can arise from bad ground connections....
I've been running 10-30 full synthetic for the last 7 years or so. Runs just fine, and I don't have to worry about going over on mileage between...
[IMG]
I did a small write up in my build thread of the HO alternator I built. Being in the factory case, I really doubt it'll put out 170 amps of...
I used Honda Accord buckets. They fit pretty easily with just some modifications to the feet on the rails. They are not a bolt-in affair...
You'll have to check your driveline angles. The difference in the angle between the shaft and pinion and the shaft and the output of the...
Good info. That's 10.4:1? With stock style pistons? Been thinking of going crazy and trying to port my extra head to see how much extra...
The GM kits are out there. I'm not a fan of the GM calipers though (I used them on my 4runner). While they might have more stopping power,...
Nam, That is awesome! Did you ever post a write up on them before? I've somehow missed it. While I do run standard H4 reflectors, the...
Separate names with a comma.
