So I checked it out, the motor has a definate rod knock..... Along with other interesting noises... Lol. In his best interest and down time...
its IS possible, especially if they didnt get to chopping anything too much. take some shots of what you got to work with. the rear chances are...
Ford taueus fans or volvo, or land rover fans (all dual fans) and fair quality.
Du-et
You will need to remove your hub... Same process as if you were swapping out rotors... Key trick, you can use rear studs up front. They are about...
Its doable....
if you dont really care about driveability, tire wear, or safety, then allot of camber is possible. just add shims up front till you achieve your...
will do.... as far as i know he likes em and wants to keep em....
this spawned an idea for me....... but it will require a long bed....... if anyone cares to guess :evil:
You need to start taking some measurements.... Take spacing measures from your wheel mounting surfaces to the nearest inside obsticle. Front is...
Starions still in tact. Wasnt too hard to go slammed. Drop leafs, blocks, notch out back. Drop arms, spindles, torsion and shock upgrades to...
My bud marty has it now.... Not as pretty, but still running strong.
Happy b-day brotha! Ah to be 10 years younger again :lol:
breaker bar usually does em in.......... i leave the spindles connected to undo the nut though so you dont get the excessive movement.
We'll be out there again tonight for those that wanna join in. Location is the estlake KOHL'S parking lot. Meet starts at 7pm.
I ran dual 10" from auto zone, should one fail, I would still have a backup. I also wired it up should my controler go bad I could connect it...
thats unfortunate to hear. If you have shipping addresses and receipts I would call local law enforcement and see if you cant get their support in...
The 22r is a very simple and straight forward motor. just take your time, double check your steps and you'll do fine... Make sure to use a good...
With your drop pitman, it should still line up. For springs, I would go through marlincrawler.com their springs are real nice and adjustable. They...
Those look like either a volk or works wheel of some sort.....
Separate names with a comma.
