I'm working off of memory here, but, what spring? Is this spring compressing the slave cylinder? IIRC, the slave cylinder rod is held between...
That was my concern when I first heard about using 4X4 fenders and made me stop... But everything in front of the bed looks great!
Are the Belltech 3" lowering rear springs stiffer than stock? I went to their website and they don't say; the only thing they had to say was the...
I can't/won't/don't claim to be an expert or guru all on things Toyota but in the 28years I've had my truck, I've never seen a standard cab with...
Yeah... when the first hi-performance FWD cars started coming out, everyone got all excited about all the possibilities of mid-engine RWD sports...
Here is some info:...
From the picture, it is obviously one of the variants of the 18RG. It looks like it has the carburetor balance tube which means it is probably an...
Nice find. Interesting. I've never seen a standard cab with the bucket seats and console. Is the back wall carpeted? And is the spare tire...
And use locking nuts for security so that you need two people, one inside and one outside to remove the bolts. That's how I mounted my cross-bed box.
Yup. Unless you like the sound of a diesel engine's clatter... LOL (from experience)
LOL I'm sure he meant up a "size" in heat range... But I'm surprised his list does not include a header which will probably give the single...
Thanks for this tip! I am slowly making a new 3rd brake light for another car and was wondering if the bright white LED would wash out the red...
Yeah, but OP wanted to spend less than $1,000, like around $500...
Actually, OP may have a point. If you look around at the many Hispanic gardeners, they are usually driving old Toyotas and Nissans (not as much)...
Are you planning to haul a lot of heavy loads or go racing? If not, why not just convert to 1/2 ton brakes? I've never felt mine was under-braked...
Eck. Brings to mind that saying: "just because you can doesn't mean you should"...
Camber and caster. Toe is adjusted by tie rods.
I don't think they will. I used to have 15X7, 0mm offset wheels and they stuck out about an inch, all around. I haven't had a chance to measure...
Strap in - you asked for it :D For discussion purposes (and this is where I start when calculating between the two), let's start with a 15"X7"...
8" wheel with 5" back space should be about a +13 Offset.
Separate names with a comma.
