Sorry I thought I put the price in it. Yes it is $149+ shipping. I have a lot of time into designing these to make them as simple to install as...
This is the new design for the transmission cross members. I have a jig and templates set up now so I can make them a bit faster. [img]...
Nothign will bolt up on these trucks. Run a 2WD bumper. The 4WD ones are too wide for these trucks and have to be sectioned. The 2WD ones stick...
Looking for 84-95 stock spindles. Or 95.5-04 Tacoma spindles with hubs.
Its not "easy" really. If you don't have much fab experience is can be very intimidating.
Yeah, I paid to have it done elsewhere.
You could easily lay out a 78. They have a nicely designed front suspension thats easy to work with. And the cab would sit on the ground without a...
Its got 18" wheels. The wheel tubs come up to the pinch weld on the firewall. And its a 5 speed truck. :D
I'm in Windsor. North of San Francisco, south of Redding.
I just need the compressor with a clutch, and the bracket. How much do you want?
Looking for an AC compressor with a clutch and mounting bracket for a 22R or RE.
Sorry I have not been on in a long while. My truck looks much different now. [img] [img] [img] Its listed as a Lexus because of the wheels, and...
Its pretty easy, just pie cut and bend. You can use newer Toyota arms, but it will push your wheels out about 1/2" on each side. And if you...
You have to angle the arm before the balljoint, so that it doesnt bind. I found the pictures from when I did it. [IMG] [IMG] Make sure to...
84-95 spindles can be made to work, if you get EVERYTHING off that truck suspension wise. You need everythign but the upper balljoint. You need...
You can swap to 84-95 drop spindles. But you need the hub, rotor, caliper, and brake lines from that year truck. None of your stuff will bolt up.
Cut the with a grinder. The spotwelds are on the inside fo the roll on the bed and impossible to get to. Just cut them and make them look like...
I swapped to 84-88 spindles and balljoints, and modded the lower arms to accept them and made my own uppers. Only way you can get a drop spindle....
Put a new output shaft seal in the transmission. I think after having the driveshaft hump it a few times it started to leak. Plus it was 30 years...
Yeah I passed smog. Lol. Its all legal now. As for the bed, I've got some ideas. I'm not set on any one thing yet.
Separate names with a comma.
