I don't really see how though. If it didn't lean before you added the blocks and adjusted the torsion bars, and the blocks and adjustments were...
You can. Most guys want to just cut it out. Bending the rod, or modifying the lower mount is the best way to go about it. It retains factory...
Um. The LSPV works anytime the bed ISN'T loaded. When the bed IS loaded, it allows more brake fluid pressure which results in more braking...
Are you done yet?
If you are talking about the mirrors that attach to the front of the window frame.... On the inside of the door, there's a triangular piece of...
Interesting. If the keys are at drastically different adjustments, I doubt it has anything to do with the rear setup. Has it ever been in an...
Easy. The pistons in the RTE are dished, rather than flat. Other than that, the engines are very similar.
You didn't read it wrong. I read it that way too. Just figured it had to be written wrong.
If it sat level without blocks, then you won't need two different height blocks unless you've made uneven changes to the leaf springs. The...
It's a good idea to move the vehicle a good bit before measuring height adjustments. If you don't, you'll chase them for a while.
Have you driven it much? It may need to settle in. On top of that, Did you adjust the torsion bars? If so, they may need attention.
Ok, We'll need a lot more info. What kind of setup are you currently running? Can we see pics? It's a really loaded question that you've...
I hear you guys have the fastest street minis in the nation there in OK.
Great write up.
I have a 4.10 set, but being that you're asking for the 3.42, I assume you are looking for a shorter than stock gear...
It's been a while, but I think the stock bolt will continue to do the job. The torsion fits into a key that unbolts separately. Again, going by...
Is the dash pot connected properly? You didn't cap that off with the emmisions stuff did you?
Yeah, he didn't have any posts, so there wasn much I could do about it. I forwarded the spam to Jeff, the site admin.
That's awesome. Don't worry about it though. I don't want to inconvenience you with that. It'll make it all the better when I finally do get...
NashMan, I need some Herman's Dark Lager from V.C.I. Brewery.... I'm sure I can order it from them, but haven't looked into it yet. I just...
Separate names with a comma.
