I'm still friends with him on FB. Let me see if I can raise him.
Hmm. Mine were identical to stock. I even measured them. I also don't run steering stops. I like being able to do a two and a half lane U...
Hey White Trash, how do the spindles affect the ackerman angle? Just curious...
Most definitely. You'll be ok for a bit, but it does need done for tire wear.
Drop spindle can't have any effect on ride quality. A ball joint flip changes the geometry of the suspension and could affect the ride depending...
Wow. I couldn't imagine losing either of my boys. It scares me just thinking about it. I'll be praying for you and your wife.
Still the favorite pic of mine... So many good trucks out there. [IMG]
That's clean. I like it.
What are you trying to get out of it? The 7.5" isn't as weak as it's made out to be. Unless you are running really sticky tires and putting down...
The body lift isn't required for a 1/2jz swap, so I doubt you'll need it for the 7m. It's going to be tight though. As far as the oil pan, not...
There's a bit of body roll in high speed turns, but not much. Still, the sway bars, at least in the front are desirable.
I've seen it done. There was a chassis at Slamfest setup for it too. I plan to get one on mine one of these days. Side-side would pretty much...
Looks great! I'm wondering though. While the frame tank seems like an interesting idea, has it been done much before? The first issue that...
Not sure how you'd do it and keep VAST. I'm sure it's possible though, as a lot of guys swap out the coils. Probably as simple as just using the...
The injectors aren't fired in sequence. They are batch fired using the tach signal from the igniter. The funny thing is, there are two...
We are going to need pics of the Z to verify authenticity. Welcome, BTW...
Welcome!
No, it uses the bearings from a 2002 4runner IFS non ADD diff and was made for the same. The bearing has a different ID and is larger in...
And keep in mind that re torquing the bolts on the water pump isn't what you think it is. I think they only go to 6 or 7 foot pounds... They...
BTW... LC Engineering... I love them for what they do, and I'm not against capitalism, but they wanted $700 for seemingly the same carrier....
Separate names with a comma.
