Sd yota- thanks bro :waytogo: ok well im not gonna get the rear springs from it cuz I already have an extra leaf on it and it rides pretty stiff...
Yup im planning on it. Imma take all the measurements on my suspension stuff and take lots of pics before I head over to picknpull next week im...
Its probably the cold air idle valve. Id start with adjusting the idle control valve to lower your elms a bit and if that doesn't help clean out...
Does anybody on here have access to a 1 ton that could take the measurements?? :shrug:
Ok so does anybody know: 1.whats the diameter of the 1 ton sway bar and torsions? 2.Can they replace stock parts on an 89 non 1 ton?(with little...
Im 99% sure its just the alternator. Take it off and have it checked to see if its charging.
Cool man ill let you know if I need it
Check the basics oil, gas, spark, it happened to a buddy of mine he was about two qts low and was running on fumes :/
Ok so I set it to 10* to see how it feels and it felt a little very slightly quicker. Im assuming set it to ten degrees from 5* is advancing it?...
Hmm well how much do you want for it?
umm idk whats the difference??
yup i know itll lose some lowend but its gonna raise the rpm limits its not probably the best thing to do but i want something different, and...
figured it out basically his rims have too much positive offset and are a lil bit too tall. forgot to check the steering stops but eh spacers will...
Where is the te and e connectors? And what's the reason for jumping them? Also how can I set it to 5 or 7 if there is is only a 1258 on the timing...
my 22re says its supposed to be at 5deg btdc does that mean its supposed to be at the 5 on the timing tag or the 1, 2, or 8?? help! im doing this...
And larger valves and pistons
If I do destroke it, it will definitely involve polishing the intake mani, porting, and headers so I think air flow wont be a problem the only...
Do they sell shorter rods. If they do id probably buy higher comp pistons and maybe mill the head a little bit and use bigger pistons?? But I...
What happens when your driving the car and brake? You might wanna try bleeding your brake fluid. Its probally a good place to start.
I had the same problem with the thermostat housing bolt breaking in the mani. I ended up having to get another lower intake mani :(
Separate names with a comma.
