The idle mixture screw is just that, idle mixture, it really does nothing other than control idle quality, you can lean it or richen it, but...
By not having the spacer in there on the new pump is it possible you over extended the leverage and ruptured the diaphram in the new pump? just a...
Theres a lot of factors to consider when choosing a camshaft other than going to the shelf and grabbing the biggest one you can find. When you...
No experience with those particular sticks, but the Crane 302/302 is gonna give you the lumpiest idle. Bigger is not always better FWIW
Hey now!!! theres some advantages to being up there, the views better, no tire to fender clearance issues, easy to change oil, fat girls can't...
Why not? it matches the trim on the house pretty close :D
I still have a sweet lil 20R head, its a LCE street performer thats been freshened up, has 22R seats installed, new 22R valves, bronze guides,...
The head without the fuel pump hole and no bosses for power steering brackets is a 20R head, 78 or older, round intake and exhaust ports, the...
The transition started around late 84. That was a good price for all the pieces, too bad it wouldn't have worked for you.
Just to keep folks from confusion I made a little correction, the early engines were a tall block, tall head, used a 98 link chain, the later...
Put new head gasket(s) in it :D
I think Kekaha is correct in it being a cam cap and not a main bearing cap, if you have the room to drill to the next size plus room for the bolt...
To be honest I,ve never had any problems running a 32/36 off the stock pumps. An 80 p/u should have a mechanical pump on the passenger front...
I guess in LC's defense I'll say that I have dealt with them for a good many years, think I bought my first parts from them 17 or 18 years ago...
The weber DGV's like around 2-1/2 to 3 psi max, by using a bypass regulator its taking the strain off the electric pump and the carb needle valve,...
Here we go again :D First it would be best to find out what your pos fuel pump is putting out pressure wise then determine if you need a...
I run the Mallory Unilite mechanical advance distributor, Mallory promaster coil, inline spike filter, 8mm wires on both mine, no complaints at...
I would say the numbers you listed are normal with the 20/50 oil
Separate names with a comma.