Without knowing how it runs when trying to idle I,m just guessing, is it flooding out?, hard to restart?, choke plate closed or partially closed,...
Stockton wheel
The chrome one and black trim cover are from a 75, the blue set are from a 76 and newer truck, still a easy swap though. [IMG][/IMG]
The Holley 350 would be comparable to running a Weber 38.... SD, Hows the accelerator pump adjustment and pump shot? too much, not enough?...
If I remember correctly the chrome metal inside handles were used in 75 and possibly earlier and required a larger trim cover than the plastic...
Put it this way, if you got a worn out engine, aren't worried about quality or longevity, just strictly want some of the cheapest you can get and...
With an engnbldr cam, anythings possible:lol:
I was just listing ideas as to what could cause the misalignment, not saying it was, just that if it was it could possibly cause the problem, if...
Somethings out of alignment somewhere, wrong distributor drive gear, timing gear on cam on backwards, fuel pump eccentric plus the spacer being...
Are you using the correct distributor drive gear on the front of the cam? they make 2 different ones, the early one is longer for use with no fuel...
I have that same alarm in my rig and have had no problems at all, works great, I have a few extra features I bought at the same time that brought...
78 has an in tank electric pump, relay is under the dash near the steering column, pull the wire off the oil sender on the side of the block next...
:nana: We musta been having the same thoughts at the same time, :waytogo: FWIW, late model, laser block engines, late 84 to early 85 and up...
I spoke with them on the phone several years back regarding the flares/spoilers for the 72-78 trucks and they didn't have or carry them, they only...
Thats a strange one, the flooding? the fuels coming out of the vent tube when it does it? The float level is set correctly, just trickling over...
I doubt the foam not being there is causing the problem, I eliminated it on mine just so I didn't have something in there that might breakdown and...
:waytogo: I used to run the 500 on mine with the S/C, I finally swapped it out for an Edelbrock 500 4bbl, the Holley was fine but the 4bbl was...
I would think the 50 idles are a bit on the fat side, but the 20r intake on a 22r head has me wondering how well its sealing, possibly its...
Separate names with a comma.
