Can't answer for others but mine are all upholstery, no seat covers here.
Thanks, this what you lookin for? [IMG]
If you look at Nuffs first picture on page 1 at the gas station, those larger ones are 77-78 vents, page 11 of the black beast, the small vents...
ya beat me to the punch SD :)
How long since the fuel filter was changed? might be a good starting place if its been a while.
Having the distributor off one tooth either direction really has no bearing on the cam timing, it will only effect the ability to rotate the...
For the Mikuni's I have dealt with Wolfcreek Racing, the Webers, either Weber Direct or Carbs Unlimited, be preparred to spend some money as...
Ujoint or carrier bearing if its a 2 piece driveshaft
I built and installed power windows in both my rigs using parts and pieces from a Toyota Supra, but those are both mid 70's trucks, I would think...
In addition to the parts listed you would need the evaporator under the dash, wiring harness under the dash, ducting, dash switch, fan belt, some...
You sure you got the cam timing set correctly, not a tooth off one way or the other?
I run the Comp 268S in my 20R with dual side drafts, only did mild port matching and run a single valve spring, many miles of reliable service....
I take it your meaning the heater fan? which I don't know what that would have any thing to do with the overheating issue. Several possibilities...
Stock alternator, stock wiring, max output around 50 amp or thereabouts, not counting the normal draw of lights, heater, ect. then add a 1400 watt...
Check the cable from the heater control to the heater valve under the hood on the firewall, cable may be broken, unhooked from valve, unhooked...
Its a VSV (vacuum switching valve) vacuum is supplied to one port, as engine heats up the valve opens and directs vacuum to the other port, if...
Separate names with a comma.
