that's your soft springs with no bumpstops allowing stock tire height to rub onto your wheel wells.
Mine was originally automatic with 3.73's also. It depends on where you got the W58 from. Mine is from an SC300. Mine reads 83.3% of actual road...
Left hand mirror still available, SMC? mine broke where it swivels. :(
I give up.
crazy, 10" width with -38mm offset or +38mm offset? -38mm offset means that'll stick out of your fender a good 2", roughly.
make sure your clutch is disengaging all the way and make sure you have enough transmission fluid.
I'm sure it's something more serious than masking the problem with camber.
check your smog laws. things get a little tricky. for anything not involving emissions, use 2.25" exhaust piping, it is optimal for our motors....
are your fenders straight? Measure the hub and brakes, make sure it's not different. The truck has no history of accidents, correct? provide...
he has low offset wheels with smaller tires now.
I'm not the one for downgrading to smaller tires. The wheels are probably 14x7's or 14x8's with an offset close to zero. Get your fender lips...
Give me some dimensions on the new wheel's sizes. They probably have too low of an offset. Take some pictures, from the front 1/4 angle, the...
Thanks guys. Not bad at all for your results now being corrected from the wiring being off lol. I tried inputting W55 ratios and various rear...
your caster could be off.
I hope it's reading correctly. The only way I could calculate a 25" tire with a W55 at ~80mph at 4300RPM is if the previous owner put a 4.56...
as long you do tow it safely. I think the previous owner of your truck swapped the transmission OR the rear end. Hmmm, and you have a...
master cylinder, I got a Exedy replacement from amazon for cheap.
You add shims to increase camber... AND caster. once that's adjusted, your toe will be off. and your whole entire ride is going to be way off.
Lemme guess, you lowered it to the point where the suspension travel doesn't stop so when you hit a bump, the tire slams into the fender wells?...
4300RPM's in 5th, at 80-90, with 25" tall tires? What transmission and rear end do you have in that thing?
Separate names with a comma.
