Ok so here are the specs of what I have done to the front. -belltech 2" spindles -belltech shocks -stock arms, sway bar, torsion bars....
So today I drove it down the block to check it out. This week I installed my belltech spindles and shocks. Then I found major clearance issues...
I ended up just unfliping the ball joints and my clearance issues went away. I then cranked the torsion bars down. Maybe the offset on my wheels...
I was thinking about it, can I run fliped ball joints and spindles?
Ok so here is whats up. I first lowered the front of my 93 by fliping the ball joints and running spacers simmilar to sdyota's write up. Im...
Stillen is where I got my spindles. I paid 320 but I also picked up shocks and I picked them up. As for the rear I got the 3" blocks at pepboys...
well I can say it all depends on what you want. My truck was once a prerunner. I rocked the fiberglass, lift and 31" muds. you have to pick what...
ok just looked at the pictures, I can see that the shock wouldnt fit inline with the bag. I guess im new to this lowered stuff. I guess the days...
Yeah I know thats where it usually goes, but by moving it in can you gain enough room to run it within the arm to gain steering space, or is it...
Now when you move the bag in like that is there room in there to mount the shock next to it. Like inline with the bag because I know some...
Ok cool. I will have to check that out.
I just picked up a spare cover to clean up and want to polish. What did those who have done it before how did you do it and what did you use.
here is a picture of tonneau.
im also going to do spindles ( bell tech), should I try and get it close my self or can I drive it to place to get done.
Well if you think about it thats how all the old hot rodders did it. Back in the 40's and 50's bags and juice didnt exsist. Seems like it would be...
So a couple of updates. I picked up the bed cover and got it mounted. I just need to get new locks for it. I actually drove it again. And today I...
Yeah it has the mounts on the cover, just whats the rule of thumb for the bed rail part
Yeah I probably will get the back done too. Just picked up my cover, its a gaylords cover. How hard are they to install, as far as locating the...
Not exacly sure what type of cover it is. I only saw it a couple of times when I met the guy a month or so ago. But its an over rail type and...
And how are you guys relocating the lines ontop of the valve cover. I have never liked the way it looks with the lines and valve things all over...
Separate names with a comma.
