The RN#3, 4#, & LN40 does have a specific A/C bracket. When Toyota rolled out the RN50 series in 1984, then parts numbers and part designs also...
@ Jose - let me know which direction you are headed and then I'll step you through "re-keying" the torsion bars. Rick
Well, let's put it this way. The torsion bars are your front springs. Modern cars have coil springs and our trucks have torsion bars which are...
Yup! That is way off. Is this an aftermarket A/C kit?
Here's a closer picture of the v-belts, compressor, & A/C bracket. [ATTACH]
Here you go: [ATTACH]
22R bling
If and when you install the aftermarket carb kit, you will unleash some much needed power. My truck started to run rough back in Jan, but found...
That's cool! Sport Trucks ROCK!!! Keeping it fairly stock is what I did with my truck. You're are safe just as long as the truck doesn't need...
Welcome to the site! I'm partial towards the '79-'83 trucks, so have fun working on the (2) 1980 models when you get back to Guam. Feel free to...
Welcome!!! GREAT find on the '78. You just don't see very many 1970's colors anymore like your yellow, and the orange, & the green. What are you...
What does the police report say? Either way, they are still at fault.
That's good news! Save your truck and do the work yourself. If I was in your situation, I would have done the same thing. Looking forward to...
Yup! That's what I gathered based on the 4th picture. You were clearly in the lane going straight and you can tell the SRT came into your lane...
First of all, sorry this happened to you. It's not a cool thing to see a Toy in that condition. Looking at the pictures from your 1st post, I was...
Cool! I'm on the Northside of SJ. Born, raised, schooled, played, & worked all in the 408.
The intermediate shaft had to be changed when going from non-tilt to a tilt because the column tube is different. Not needed if you got the...
GREAT looking interior! Nice job again. Not too sure about the '89-'95 trucks, but in the RN#3,#4, & LN40 days, a deluxe model truck could have...
You are correct! The ignition switch from the non-tilt to a tilt wheel are definitely different. And, also the intermediate shaft is different....
That's a mighty brave endeavor. Nice job!
Separate names with a comma.
