I know @Ivey recently put some on if I recall right. You can check his thread for info on his setup.
The is300 might actually be a good donor car for a 2nd gen short bed. The track width and wheel base are really close.
Wouldn't be of much use in America just reference for yourself. You can find full diagrams online with the part numbers. You'll probably be buying...
I would think the guy that has his alt straight to the battery would be running a gm 1 wire conversion.
Lmao it's good that you know your abilities to not put yourself in danger but a welder is nothing to be afraid of. You may catch on fire or...
Bit of a loaded question for a newbie. Lol In general it's about channeling the body to the frame so it's even. Tons of cutting and welding. One...
I was so confused seeing the reliefs for 4 valves on the pistons. Thought this was a 22r for a second.
I think it would be fine. If I can adapt the cd009 6 speed it has then I'd be set. Lol
Before to long I might throw my 2jzge from my IS300 in the truck and the 22r hybrid in the car. Lmao
The driveshaft is pretty close at normal ride height on my 73. I don't think you get much side to side movement with leaf springs. It can hit the...
Here is a tip on polishing aluminum and other soft metals when you get back to that. When you're sanding it's all about how well you sand through...
Yeah I would find a welding shop. Such a small weld a good shop would probably stop what they are doing and not even charge you.
The jdm import inflation is what's really crazy. Quickly gave up on the thought of getting a r34 gtr soon after they are legal. Maybe if I would...
There's alot of that. There's the case of the guy seeing his truck overseas with his business and contact info still on the side. That shit can...
It's definitely a small percentage of car collectors looking for a truck. I've seen a 4wd 3rd gen sell for 50k. Can't recall all the info but for...
In reality ten years isn't going to help the value much of most of the trucks on the road. You'll probably see the same vehicles you see now in...
Drill and tap. Sheet metal screws can rattle out and end up in the valve train.
How is it running with it at lower idle? Reading back on on how dropping the idle made it worse has me wondering if it's the tune still. I think...
It could just be the heavier pistons you are feeling. 4 cylinders are known for being a little shaky.
Kind of just sounds like rockers. Has a little bit of the tractor sound going on off idle that could be you carb needing a tune up or exhaust...
Separate names with a comma.
