Make sure the wheel dosnt have any major flex to it. I'm not 100% sure how the horn works but I think it might be a contain ring on the base of...
Oh man going to be hot boying it up with the nrg. Better make sure it dings. Lol What wheel you going with?
You do go a little more room in the later model. You can do a flat face wheel as well if you want to gain some more.
You will be able to use most toyota hubs. I think I used a mrk4 supra one. The nrg are solid hubs and can help keep the stick out short. If you...
Pulling plug wires and listening for a change in how it runs is an easy way to tell if you have any dead cylinders. If it doesn't change with a...
How much smoke came out? Was it any different then any other car during start up that day. Was it pretty cold then? Do you know what coolant...
Probably going to take a while to find one at a decent price. 5k is about what you would pay for a nearly perfect one a couple years ago. 10k for...
Sounds like a dead cylinder at idle. Unburnt fuel smells alot like regular gas. You could have valve seals leaking and dumbing oil into the...
I want to say yotashop.com sells some separately. Edit after looking into it they don't have them for the 20r.
They probably will the thing will be if they have any stock on hand. I'm guessing they don't have much of a retail section like most shops.
I want the toyota race spec engine from doa or the big bore hybrid. Good price for the big bore at 4k.
Just a heads up on a stroker. Generally you wouldn't do a turbo build and stroke it. You want high rpms and with rpms you increase piston speed....
Might be best to wait out this shortage of parts because you can get a new block for a reasonable price when they are available.
It's a long motor. You'll be cutting into the firewall. The Supra forum's will be better for getting info about the motor. Like what you need to...
You can do mega but I think it only stays up for so long.
Finding the exact interior you're looking for can be hard if it wasn't the go to choice for the first owners. Their's probably a good bit of first...
The first gen trucks are way harder to find parts for. I've seen a few new parts for them on Facebook here and there. Do you know of PJ's shop...
He's on Facebook only. PJ's shop thiland.
No I got mine off ebay before I found the guy. He probably could get you one. I pretty sure he restocks after he makes a sell.
Fuses and relays are a typical move. Only takes one small wire or any conductor you got to jump it. You really want to run the car out of fuel if...
Separate names with a comma.
