Your driveline will be fine. As for the u bolts, if your truck has perches wider than the springs you're home free either way. If you have spring...
Measure your spring perch width and compare it to the donor truck. If they are the same width it's a direct 100% bolt in. The 8" diff is about...
There are a couple companies making them but lce is the only one that I know for sure that makes one for the W55.
45 psi is just a bit excessive. :lol: So I've been googling ig brake installs and surprise, surprise I keep being led back here. :D Looks...
Amazing what a difference there is in the ride when the tires go from 45 to 32ish psi. :lol:
Back in the late 90's I worked at a wrecking yard. I pulled the inner door handles and window cranks from a late 80's corolla. They were...
Yea they're 98ish cobra/svt wheels. If i keep them I'll clean the edges up and decide on a color for them. Probably another shade of gray metalic.
Need to check the air pressure in the tires when I get home. I'm guessing they are running about 50 psi at the moment so they ride like garbage.
Crap tires and even more craptastic wheels are on. 2 of the wheels look like they were drug across half the curbs in the state and used to test...
They both look like typical chicom parts. They'll be fine for what you're doing.
Looks in the classifieds here. DJM lower control arms were on there awhile back and daroach still has torsions and front bar listed, I bought my...
All the "performance" sway bars and torsion bars are just copies of the 1 ton parts. I'd source 1 ton parts, drop lower control arms and drop...
I'll help you out even more since I never added this pic to this thread. [IMG]
Marlin carries some fantastic clutches but for standard driving duties they are sever overkill. Any parts store clutch will do but if you'd like...
I believe there is supposed to be a bit of float in the mount and by tightening the bolt you removed it. Another thing to consider is the tip of...
4 speed to 5 speed uses the same driveline etc. I haven't done a 2wd auto to manual swap so I can't say for sure how the driveline length goes...
There should be no problems with the crossmember. I just had a thought, are you dealing with the crossmember back by the tail shaft of the...
Strut bushings were one of the easier things to change. Bust the 27mm nut loose on the forward end, pull the 2-17mm bolts from the lower control...
The torsion bar crossmember that the trans mount is bolted to is welded to the frame rails from the factory. Earlier trucks without torsion bars...
So after sitting on a full urethane bushing kit for my front end for at least a year I finally installed them today and pulled the drop spindles...
Separate names with a comma.
