First place to look is at the steering stop bolts on the indie of the steering arms. I removed the stops completely and I turn wicked sharp.
Leaf springs and the frame are about even with each other.
The 265's fit my 89 with the lips trimmed on the bed side. On the 84 with a 4x bed they clear the bed sides but require a 1/4" spacer to clear...
[IMG] See the dimples on the edge there? Those are the spot welds that need to be drilled. Follow them around into the fender well and across...
My hang up is between 60ish-72 gm truck arms or the torque arm setup from a 2000 or so camaro. Both would have a watts link. Both will work well...
S13 stuff, right on. I'm hung up trying to decide on slapping mk3 supra front and back or just reworking the factory truck stuff up front to have...
Yea the chipped key. I've looked into doing the ITB's one one too but I can't convince myself to spend the money. :lol: What front suspension...
This is going to be a sweet rig when it's done for sure. :D How are you getting around the pass key system on the 3sge computer? Aftermarket...
2wd or 4wd the info is all relevant as far as mounts, oil pan clearance, wiring, bellhousing etc. The frame side mounts are the same in 2wd or...
So it's the same damned thing but offset takes bead thickness into consideration. Thanks. :D
Dumb question but how does that compute? I've never been able to get a solid explanation on the relationship between offset and backspace. I've...
Yes it's a bolt in operation but there are a couple of slight differences you'll need to note. The intake manifold has a different passage...
Yea the proper organization would make more sense. Maybe they're going more by suspension design, but that wouldn't work out either since 78 was...
Not sure if it was there earlier or not either, but it sure is now! :lol:
Groovy, thanks for looking into it. The old forum worked fine on mobile running no forum viewer bs like tapatalk etc. This version seems solid too.
Seems to work well enough. Where is the "mark forums read" tab?
That forum still doesn't have any posts or topics. Yea, this place is dead alright. :lol:
Was the trail off camber a good bit? Also what was the elevation compared to where you usually drive? We're you high in the mountains or on a...
If it's from an older celica it'll be a w50 and the majority of the trans will be made of cast iron.
I think 2 door runner doors are the same but I know for a fact that 4 door runner doors are shorter in length and the window frame is swept back a...
Separate names with a comma.
