me and a few other buddies have run wheel spacers before... never had issues. i think fokai ran spacers on IS300 wheels for like 7 years with no...
you dont KNOW what backspacing is? or you dont know what backspacing to get? it all depends on what you want to do with your truck. do you want...
get me a picture of the center of the axle (center of the drum) if it has 2 casting lines, its a 7.5. if it has 4 casting lines, its a 8". easiest...
sounds like the signal cam is either broken or could be just stuck with years of lint dust and grease.... pull the steering wheel and take a look...
honestly it really depends on your area. around here, if im looking for one, im looking at around 300 bucks... complete end to end.
wow..... cali sucks a fat one for car enthusiasts.
damn...... :( yea, i have a set coming in. if/when they start doing this, im gonna ask for a refund. or have them send me a full clear set. i got...
also if you can find an old oem radiator, some shops will rebuild them with the stock tanks for less than the cost of a new one.
yea... the aluminum/composite ones are crimped and sealed with an epoxy... the areas near the ports arent crimped since the hose connections are...
gearing on the tacoma rears are pretty much the same as the earlier trucks... the 7.5's are interchangeable between taco and pre-taco rearends....
man that truck sits nice!! very nice!!
get bilstein's in the rear... they are a good high pressure gas shock and have progressive valving... either or kyb gas a just.
very nice!
yup... clutch looks fairly new... lots of meat on it.
its worth the $20 alone for the reaction it will get as a shifter :lol:
i second this option.... pin point the source of the noise... make sure its coming from the front or rear and start your investigation from...
:thinking: hmmm..
awesome!
yea... the tacoma rear end will bolt up, the only thing is the T for the brake lines are on the wrong side so you have to swap that. the 8"...
as far as i know yes they do fit. ive used a newer header on an older motor without issues... the only issue you may run into is the air injection...
Separate names with a comma.
