I upload from IMGUR. Copy the link and use the little photo upload thing next to the smiley face here
Dude 21mm is almost an inch. The head on the center pin cant be bigger than maybe 14mm. Please post pictures if you can because no one since the...
Should say 17x8 on the back. Measure in between the bead seat. Looks like its a 8" wide wheel. If all 4 are the same then maybe 225/40 would be...
So far i've gathered that they are 17" whats the width? I have 17x7s and the tires are 205/40 and they are pretty much even with the wheel
So it was the rod at the pedal that pushes on the clutch MC?
Mine does have the connection for the heater core. And its actually blocked off, im using the connections on the passenger side of the engine for...
I have no clue what radiator is in my truck. I assume its from a 20R, and im running a 22R block/20R head and have had no issues with cooling....
Wow never saw how they extended the floorpan. Literally looks like the early floor with some flat extension to the back wall
Welcome
Try reconnecting the PCV how its supposed to be. Did you change anything right before it started acting up? Like replace a part or something....
Mines bagged, drive maybe 3" off the ground. And i drive the shit out of my truck. If it scrapes it scrapes. had a 2014 Scion xB on coilovers was...
In case anyone is interested @minitruck_revival on instagram is selling clear lenses for the second gen Hilux 72-78 [IMG]
That looks correct. Wonder if the pressure plate isnt working right
Got the idea from "Twisted Metal". How Bob Grant did the corners on it looked like they were inspired by the 79-83 models.
[IMG] Could always tint the amber part. I did that back in the day
Stupid question, how does the throw out bearing hold on to your fork?
Got a small update, got nee clear lenses through minitruck_revival on IG. Need to pick up some colored LEDs for them now [IMG]
Honestly i know this sounds counterintuitive but driving with a small load out back makes a big difference in the ride quality. Softens up the...
At a 2" drop you're not sacrificing anything, dont overthink it just do it. Drop spindles maintain current ride quality. You can loosen the...
I had the rear of my truck lowered via 3" block and i pulled a leaf spring out. It went down about 5" maybe and i was still able to carry a few...
Separate names with a comma.
