OK the port by the idle mixture screw goes above the throttle plate. and the port on the back side of the carb by the throttle linkages is bellow...
i guess what you call the distributor is a dual vacuum advance. some of them are retard and advance and some are both advance. allot of...
this helped understand the retard distributer http://www.firstfives.org/faq/throttle/throttle.html
thank you my books don't show that. i have the clymer and chilton and they suck,and a 8rc factory yota manual i found on ebay.but they don't show...
well i guess that diaphragm on the back of the carb is not the secondaries. it is some kind of kick up thing for the throttle plates. i dont even...
thats what key on power is
i got the engine running better than ever as far as a can tell in neutral,still not legal yet. it idles smoother and starts allot easier cold ,...
please do.thank you. i have the windows out of my truck now and the holes covered in cardboard ,cause i'm painting it. as soon as im done...
if you went to a AEROQUIP store or a hydraulic supply company they can make anything. i am sure to if you pulled enough boxes in the back of a...
in all fairness i think my volks, had more balls with a nasty 1776 ,042 heads engle 110 cam, 36mm delorto. it would bark 32" rear tires in 2nd....
i just gave up on the timing light and timed it to where it idled good,and does not ping when i floor it under load, it runs great now,it starts...
i just flogged it around the neiborhood,and it runs great it only knocks when i give it to much throttle in to high of a gear,but what do you...
all the advance comes in at about 4100 rpm. how does that sound? i still have not got it licked yet,after i was goosing it for a while and let...
i put a Mr gasket 160* thermostat in it and it stays cooler now,it never had a over heating problem but i dont mind it a little cooler,and it...
so set it at 5* btdc with advance hoses disconected and pluged. at 650 rpm or 750 rpm ? there is no rich smell from the tail pipe.the bowl...
i finaly got this truck to my house yesterday,and been messing with it all day.70 hilux drained the gas,put 5 fresh gallons in it. changed the...
where would one find this dash cover? http://www.minitruckinweb.com/features/toyota/1001mt_1971_toyota_hilux/photo_08.html
do any of you restore dashboards? or know who does afordably?
it sounds to me like 75-78 is the way to go. is it goofy fliping and swaping the 82 stuff? does it screw with the geometry of the front end?...
thats what ill do then,good news.
Separate names with a comma.
