I've considered using the factory door mounts on my 89-95 and throwing them on my fenders. That or get some CraftSquare CF ones...
First coat is light mist, next coats will be a wet coat to help the rubber lay down.
Can I put a hold on the grayish charcoal one?
if you're building for more top end power, might as well shorten those intake runners.
get a 194/168 socket and get an LED in there. It's plastic so take your time doing so, in that way you don't have to cuss trying to get plastic...
I currently have the front lowered with a B/J flip and torsions. I'm going to change it up in the front, hopefully soon. the rear is a 3" block....
mismatching non aligning valances. I had clear red front signals when i first drove at 15. I had red wipers when I first drove at 15. haha.
simply understanding offset can help you a lot.
If you actually open the rear window, you can just pull on the frame and it'll pull itself out
I'd just measure and see how much space you have.
Sprayed my wheels vintage gold. dipyourcar.com
05-07 STi's are 17x8's +53 08-13 STI's are 18x8.5 +55
05+ STI wheels are 5x114.3, everything else is 5x100
buying tires can be a pain, but hey, it's always a safety measure you gotta keep up on :)
NONE of our 22R/22RE trucks were ever OBD2.
just like how R/C drifting began in the early 2000's. PVC was initially used, a harder plastic. then we used ABS piping. it was a bit softer and...
He used 1995 LS400 calipers and rotors. Top bolt of calipers lined up, bottom bolt hole needs to get redrilled 1/2-3/4" away. Rotors needed the...
Don't forget to pull all that hardware out from under the fender lips! I thought 9 minus 4.5 gives you 4.5, thus a 0 offset lol
11 3/8's inch rotor diameter, that's a bit. I believe LS400 rotors are 12.4" and stock they came with 16's, but I'm unsure if 15's fit....
looks good. I'm sure you'll need to roll the fender lips just a tiny bit.
Separate names with a comma.
