Nice! Except... ...you defiled it with a logo! Evil!!!
I'm planning on using QuietCoat when I get to that point.
Gas door release?
It can, but it's a little retarded :nana: (not at full power). The URD kit is the upgrade specifically for it.
'01-'04 Mustang.
I just took a set of '01-'04 16" off. Didn't need to be bored. [IMG]
I found my calipers. It's 30mm.
$4 for one of the universal plastic ones. They don't filter quite as well, but they catch all of the large stuff. And, they only take 5 minutes...
I need to get a socket for it.
My understanding is only the carrier can be switched into our trucks. Please, tell me I'm wrong and the whole unit can be switched.
After you replace it, get one of those cheap plastic inline filters and put it in the softline back by the tank. Those are so much easier to...
I was looking at those Mazda rims, too. I'm pretty sure you'll have to have the center machined out for the hub.
It looks great...but you spent how much on front brakes?!!!! I wish I had that to spend on my truck. I don't think I've put that much total into...
http://www.ncttora.com/fsm/index.html
Where in CA will you be? Only if it's lowered badly. Done correctly, you wouldn't be able to tell the difference from stock. Unless it was...
Here's what I'm thinking. The top of it will look something like the part above the red lines in this photo: [IMG] The main lower bar will...
Retractors from a 1986 Toyota Pickup will work for sure! J/k! I don't understand what you're asking. You have Mazda seats and Toyota seat...
All of the pre-95.5 W series in the trucks have the slave on the passenger side.
I will have stock exhaust and intake manifolds available after I get my rebuild done, hopefully by the end of June. You can have the carb, too,...
No problem!
Separate names with a comma.
