Guy named Nick did it for 250$, turned out good and was pretty quick. Now I just have to survive till monday without pulling out my hair waiting...
Good idea on the scrap. I need to hurry up and get started as my mind is wandering to a bagged NBS or NNBS sierra/silverado. Have an...
Bummer, was gonna pickup a welder tomorrow but everyone is closed on weekends. I am gonna pickup a Miller 211 on Monday and then the practicing...
You can use schrader valves to control air pressure in the bags and thus control your ride height without an on-board air source. As long as...
I love the skyline, that is a beautiful car.
Plugs, wires, dizzy cap, rotor and vacuum advance actuator installed! Its driving pretty good, still playing with timing to get best power. I...
I know how that goes, a cheap entry fee(as far as ND was) turns into an expensive weekend with travel, lodging and wear n tear. Your tires are...
I am in an opposite dilemma! My baby smart car tires at 175/55-15 end up at 23" dia. and is killing my highway mileage. They should be only...
Gotta love Previous Owners! I am gonna replace some seals and gaskets and if this thing won't quit leaking I'll be nearly forced to do an LS swap!...
On my 86 I have belltech spindles, DJM arms and a BJ flip. I had to crank my torsions up from stock(as in never cranked to lower) about 7 full...
Thanks man!
Brake booster is connected to vacuum, it may have a leak or accentuate another leak. That could definitely cause the idle to fluctuate.
Changed oil, was 30,000 miles overdue according to service sticker in the window. Found dizzy vac adv actuator was blown, ordered new one from lc....
Not totally familiar with your gen truck but I know most can't go much over 4" in the rear without a notch.
Got some more vacuum lines replaced and re-did the timing, new timing light and hand vacuum pump are super helpful. Tested the dizzy vacuum...
I love the longbed, I always end up with longbed pickups by pure chance and the toyota actually looks good and functions well. First truck I've...
[IMG] [IMG] [IMG] [IMG] [IMG]
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] It seems I need a real camera, this turned out mostly crap. Its too bright around here for good...
Thanks! 200 is someone at work, don't know exactly who. Thanks! I am happy so far.
New pic at work [IMG] Installed Clutch MC and Slave this morning, cranked my torsions up two more full turns and adjusted drivers side tie-rod...
Separate names with a comma.
