everything is done except for the wire harness/plug swap and the nut on the bottom alternator bolt. Why isn't the bolt on? Can't get to it....
Okay, so the factory plug has THREE wires, in addition to the hot wire... How which wire goes to what? And is one of the wires left disconnected,...
OK, quick question. I picked up a powermaster 1/3 wire 140 amp 12si although from Summit and a 12si wiring pigtail from Napa. I also ordered the...
Hey, trap, you still have that cs130? Does it have a factory size pulley on it? If so, how much would you want for it? And you have a part number...
Ordered a pair of 06 Honda Civic DX 16x6.5 black steelies for the front of my truck from the local Keystone site. Less than $100 go the pair after...
Now I have an angle grinder! HO - HO - HO
2008 Mercury Mountaineer 18x7.5. I have a LOT of work to do... Somehow it is still tucking lugs in the back. Hopefully I won't have to do any more...
I already have cut out fenders... It looks like I'm going to have to cut them up another 2 inches. It seems like I won't be able to go much...
I got some tires put on my wheels and put them on the truck for test fitting, only to find out that I REALLY need to do some more trimming under...
Well, it seems it is either the afm or the cor, so i ordered one of each used on the eBay. At only $65 shipped total, it wasn't too bad of a deal....
I came home a little early from work, shoved a paperclip into the b+ and fp slots in the diagnostic port, and she cranks and stays running. I...
22re. Nothing has been done to it since the last time it ran. I had put an adapter and cone filter on, and it ran great. Today it arête acting up,...
Got my mechanic/exhaust guy checking on some tires for me in either 225/40/18 or 215/35/18. which would you guys recommend for mercury moutaineer...
I ordered a pair of Slam Specialties SS-6 bags to replace the blown front bags on my truck, a new pressure switch (150 on/185 off), a full set(1/2...
Well, pressure switch failed. It stuck in the on position, and the tank WAY overfilled. In an attempt to bleed the system down to a safe level, I...
This came in... [IMG] Yeah, it is a cheapie, but it will work until I can get a nice Momo or Sparco unit... Just waiting for the hub adapter...
Today I ordered Belltech drop spindles, all 4 ball joints, both inner and both outer tie rods, intake, steering wheel hub, quick release adapter,...
MAN, that is TOO sweet! Now I have a pic to take to my welder!
Yeah, he plumbed it using what he did just so he could play around with it, and he quit working on it a WHILE back. Let's just say that the last...
No, those aren't even that sort of fitting... They are brass shop airline fittings from Lowes... and that is shop line from Lowes. At least it...
Separate names with a comma.
