Soon I am going to lower mine 3" in the rear and 2" in the front. When I do that I will probably replace the balljointa, control arm bushings,...
when you turn it on is the fan blowing? Also make sure you have enough coolant in the engine. When the coolant gets low it drains from the heater...
I used a air chisel and a sledge hammer to remove my hooks. Pain in the ass too.
your truck would look a wole lot better with a chrome bumper and grille. [IMG]
I believe a 79-81 bumper will bolt right up. Some of those came in chrome. www.Partstrain.com sells the chrome bumpers for cheap. that is where I...
here is mine. [IMG] [IMG] [IMG]
I just used MS paint on the computer, nothing fancy.
hey check this out. your yota bagged, shaved doors and bed rails. [IMG]
another trick on the front is to flip the ball joints by moving the spindle from the bottom of the control arm to the top. I think you can get...
the sending unit in the tank may be busted. or you may have a damaged wire or the gauge itself may be busted. check the wiring and the gauge to...
Drop spindles from a 1984-1995 yota will work with mods to the ball joints. Another option is that the 84-95 front suspension will bolt right up...
I'm still running the original 14" wheels with 205/75/R14 tires. You can run an 18" wheels with a 30 or 35 series tire.
just look at twisted mini's build up on his 1980 yota. the rear end is probably easier to bag because it is just a c-notch, mono leaf or 4-link,...
Are you buying bigger wheels? If not, I wouldn't recommend anything smaller than stock. Because the smaller diameter tire will decrease your speed...
I Have A Remote So It's Not That Bad In Traffic. Just When I Change Cd's.
There is a website that has old school fibergalss lower valances and fender flares. The site is http://www.showcars-bodyparts.com/toypup.html....
I put mine in the glove box. When the door is closed it looks as if I still use the original. When installing the head unit, buy a glove box...
It really depends on how far down you want to go. if you just want a couple inches, thenk you can crank the torsion bars and use blocks in the...
Seth has a street souce profile.http://www.streetsource.com/viewownerprofile.aspx?profileid=38809 It's listed as a 1980 lexus 220 for some wierd...
These wheels are staying there for now because I don't have any cash. i start at my new job monday so now I can save some money to buy some...
Separate names with a comma.
