Below is from Weber IDF tuning info...... If your mixture screw is out more than one turn like 11/2 turns then your idle jet is too lean, go up...
Sounds like you got it figured out, the key is to do the adjusting at slow engine speed so the carb is working on the idle circuit, if its running...
Possibly the voltage regulator is getting weird.
Going to a 35" tire will definately need at least 4.88, even 5.29's, but they get a little weak because of pinion size and break easily if really...
Upper and lower gears on the right direction??? top bolt in oil pump is the correct length not binding tensioner?? overtightening the tensioner...
I would bet you have a leak somewhere as the pressure plate or throwout bearing has no means of having a pressure loss, only the clutch master or...
I think your idle speed is too high to start with, you want to get the idle as low as possible and have it still run, check the throttle linkage...
The Tekniq Q/R works great, nice and tight, actually its about as low profile as you can find, the NRG is about 3.5" the slim NRG is about 1.5",...
Any of the quick release hubs should fit your truck, they are all a universal fit, I,m not aware of any that are splined for specific...
Never mind, confusion is over, I figured out what your doing, pulling the outer shift lever housing off thats vulcanized, glued, whatever to the...
OK I,m totally confused then, those are both arms (levers) the shift knobs go on in the picture, just the other end from the knob.
I,m gonna take a guess and say its a W50.
Here ya go Da_Roach, [IMG][/IMG] The 4x4 lever has a flat end that fits into the transfer case shift fork, the tranny one has the ball plus...
If your doing the crank only, the main bearing caps are torqued to 70-85 ft/pd, so your fine, the rod caps are 45. ps, no loctite
If its the shorter shift lever out of a 4x4 thats the transfer case shifter and won't fit in place of the transmission shift lever, not even close.
Your more than welcome, glad I could offer some help. Good luck on your project.
The 21R didn't come in anything in the US, they were those Japan pullouts people were importing with claims of low mileage. Can't buy rings,...
Separate names with a comma.
