You might have the alternator tested for amperage output, it might be weak and turning on electrical stuff is drawing more power than the...
I would take a closer look at the front crankshaft seal, those are a more common source of major leakage than the timing cover unexpectedly...
:waytogo: I liked the NRG units, I originally wanted to use the gen2 or gen2.5, but the thickness put the wheel out too far for my liking, thats...
Sorry, guess I,m just not clear on what your asking? the key size is just a standard barrel key, yes, the Tekniq worked for me, whats the issue...
For a daily driver the dual port Offy intake should work fine for you. Yes thats a camper in the picture, They were originally built by...
From the size of the seal I would guess that they gave you an input shaft seal instead of the output shaft seal.
OK, theres no shift linkage that goes into the bellhousing on the passenger side, you do have the clutch fork or throwout bearing arm, same...
Most gasket sets come with gaskets to cover both carbed and EFI for multiple years, so you normally end up with extras
The bracket on the water pipe doesn't hook or bolt to anything, its just there for whatever reason.:shrug:
The empty spade connector on the back of the fuse block is just that, an empty connector, not used for anything specific. I would check the fuse...
The Offenhauser dual port intakes work best on a stock engine, the divided intake runners reduce the port size which gives a little crisper...
Thanks guys, The 4x4 part wasn't original, they never built them 4wd, there were a few back in the day that were converted by dealers using the...
:waytogo: Aw!! ya noticed, yeah it is, actually both of them have a signature on the dash. Years ago I started researching these old Chinooks,...
I know I,m old, BYE, an 8 track? damn!!!:lol: no, no 8 track, I did have a am, fm, cassette in the dash originally, but I actually never had a...
OK, Heres a few of the 76 [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]
Dudevato, heres a few of the interior of Blew, not a whole lot to see inside it as its just a empty box, insulated, heated, 12v power, 110v...
Thanks Dudevato, Yeah I have a 75 and a 76 that I built, I'll try to round up some pix for ya and post them in a new thread, Nook
Good luck, Its the only one I have ever seen in the old trucks, and its still workin, tick tick tick tick :D
Just to avoid confusion, ToyBoy's post was made over a year ago
Yes :waytogo:
Separate names with a comma.
