I,m guessing accessory :shrug:
universal joints, one on each end of the driveshaft.
You might want to check the condition of the ujoints, sounds like you may have a dry/worn one.
As far as I know the crankshafts are all the same from 75-95, 20R or 22R, the connecting rods are dimensionally the same also, but they made a...
Amen :bowdown: LC Engineering Newsletter
Whats that old saying,,:thinking: you get what you pay for!! I,ve used both LCE :clapping: and engnblunder:puke: parts, personally I'll stick...
The distributor has an Oring on the shaft where it slides into the head, quite possible it could be leaking.
No sorry, I don't have any pictures handy, the solid sleeve looks like a barrel shape solid cast piece machined flat on the ends, the crush...
Thats true, but,,,,,,, He said in his first post he thought it was the oil pan and resealed it, but its still leaking. :)
Bearing caps 70 ft/pd, adjustment lock bolts, good and snug with a drop of blue loctite, pinion, depends? do you have a crush sleeve or a...
It could be the rear main seal on the crank, OR,,, front input shaft seal on the tranny, valve cover gasket, rear half moon seal on the head, egr...
Steering components are out there, just gotta do some searching as they are getting harder and harder to find. I replaced the shock, rear...
You don't need to pull the oil pump to replace the seal unless you just want to, pull the crank pulley, and pop the seal out and replace with a...
No, 78's are different than 79's, don't know of any later years that will fit correctly.
I run an actual remote oil cooler and remote dual filter setups on both my rigs and have no complaints, the setup you have is just a water...
As far as I,m aware, the 18R and 20-22R bolt pattern for the bellhousings are all the same. This picture is of an older bellhousing with 18R 20R...
Did it to my 77, no links or instructions, I just did it, someday if I ever get ambitious maybe I'll finish the bodywork and paint and put it back...
Look back to the 50's and early 60's Chevys, they used glass bottles for window washer tanks and also bottles for holding extra washer fluid, some...
probably just the fact that its a regrind, they grind the cam base circle down to gain lift on the lobe, which will effect the adjuster length.
Separate names with a comma.
