Battery in backwards?
Also to save fuses wire in a circuit breaker into the fuse slot. It's what I do at work, makes it much easier and saves time. You know when you...
Ecotec motors are new and would be crazy. Cost ya some coin but would be cool.
you mean the main efi fuse keeps popping? means you have some component that the ecm powers up shorting, the wiring to the ecm is shorting or the...
you know if you look at the thread on teh main page, then look right you can see the last poster, then click the arrow next to their name and it...
reported lol "unleash the ban hammer!"
how are you telling the piston is at tdc with out with your timing mark being off, are you sticking something down the spark plug hole? you...
ya dont pay attention to that stage crap, was an old school trick to justify selling more expensive parts.
ya the weber 32/36 is perfect for the truck. Its what I run on my truck.
yep, you will need the coil and ignitor as well from the 81
if you have a custom cam there should be valve specs with your cam. If not I would run them at stock spec which is: Intake clearance: 0.20...
surprised they didnt just repo it and sell it like they usually do. Was probably a publicity stunt. Also I wonder if your car gets repo'd and...
uh...no pull the 2 vaccume lines from the distributor and plug em so there is no vaccume leak and set the timing to 0 btdc at idle with the...
side drafts are just like you down draft weber. Set it and forget it. Super reliable, they are just a better design cause the intake flow doesnt...
doubt its the output on the head, id be willing to bet ya smoked the amp if all your connections and voltages are good like you say.
its better to be loose then tight. Tight you can burn up a valve, loose you will just loose effiency. (sp ) anyhow when you did you...
doesnt look like SD to me. Too many trees and the sky is clear, lol hey its stumps
and not do be a dick, but you can make the 20R heads match up to the later blocks, there is a write up on here somewhere on how to do it. pretty...
ngk wires are a great cheapo upgrade, i also run ngk plugs on my rig. you will need the distro, coil and ignitor for this to work. The distro is...
caliper piston stuck. I would replace both front calipers and the break lines, then flush the rest of the brake fluid from the system. I know...
Separate names with a comma.
