https://imgur.com/SiQ12WN
https://imgur.com/a/97JJeya
Hello, Check out what the previous owner did the 80amp power line going to the battery. They just twisted two wires to one. No wonder it...
In my case it took forever to warm up. 7.50$ thermostat at napa, but it did not come with a seal. So i ordered the c channel o-ring from...
https://imgur.com/a/Sd3vpcZ sorry guys, still trying to figure out how to upload pictures more effectively.
IMG_0426 by Tempura670 posted Jun 1, 2022 at 10:49 PM
In the process of installing my weber 32/36. Noticed my egr was clogged so I decided to take off the intake manifold and replace it's gaskets...
.
I was supposed to take off the header to change the header gasket. Sprayed it down with wd40 a couple days ago. started the car and there was a...
Update the white smoke is gone I low key be wish I had a stock cam and quiet exhaust. My truck is straight pipe under the cabin it’s cool at...
Fred heath I will try that method! My oil doesn't look milky but it does look more liquidy than I remember. It has new oil and has been sitting...
https://youtube.com/shorts/MeJ2ZZlkUt0?feature=share
20211128_094504 by Tempura670 posted Dec 1, 2021 at 4:15 PM
I removed the AC system. I just started unbolting stuff and removed the lines, condenser, smog pump, and compressor. I just snipped the belt....
Sirduce I know right? The baffle is exposed on the rear anyways with fins with holes on the inside.
edit: When painting it did look like specs of white but it it dried into a sandy texture.
I just put a thin coat of the gasket maker with my finger right? I wish I had the baffle gasket but I don't.
Went to the machine shop to cover up the 3rd hole.. they didn't charge me anything. Decided to leave the welds. Im scared if I grind it down and...
Separate names with a comma.
