If your going for a matte look, could i suggest finding a red primer thats close to the color you want so that it would be cost effective and easy...
Sweet! Looks like you are going to have an easy install, if you're replacing the spindles just use like a 3lb hammer and smack the spindle where...
only thing you can do.....get the torch :)
6g72 twin turbo.....comes out of a 3000gt vr4, With a few small upgrades you can make 450hp easy
Has anybody thought about retro fitting the regulator and motor and just attach your glass. if the doors are only slightly different i bet you...
I always use Quaker State 10w-30 high mileage oil, It's the same as their regular semi but has a higher zinc content.....oh and a napa or fram...
You need to jack the front end up and shake the tires to check for movements so you can find out which suspension parts are failing. From what...
Does the door still not open? did you test the latch and locking mechanism? Your door rattle is probably coming from a loose screw/clip/window...
PLEASE tell me your buying...Even if something is completely wrong look at all those good parts!!!
unless you can get the tacoma kit to fit our trucks there isnt a bolt on kit for rear that i have found
First you need to go here >>> Wheel Tech - Offset And read up on wheel offsets Then you will understand that a 30mm/20mm spacer will increase the...
Wait you dont simply crimp the wire hahaha j/k :ROFL: Good write up :waytogo:, I hate to see nice things installed then when you really look...
this is what i use and have had no duty cycle problems and get very strong welds out of it, very easy to use and set-up. MIG Welder 110VAC/ 135A...
you should check the parts in your steering link but I can tell you where your creaking is coming from when the wheel is turned, Our trucks have...
1972 Toyota Pickup
Do you also need the metal pocket that goes around the aftermarket stereo? Ive got a bunch of those sitting around.....
DDM also sells the house just make sure you get the right size. Ebay has some for about $20-$50 depending on the style you want. I got my DDM kit...
how much of that stuff did you have to buy?
Great looking truck, everything look nice and clean under the bed. Have you done anything on the interior?
Yes the aircraft stripper will remove everything and take it back to bare metal. I agree you could go get a soda blasting kit but the aircraft...
Separate names with a comma.
