I believe a good 22re cam would be in between the 270-280 duration but you should talk to the techs a LC and let them know what you want to do and...
did you try another air flow sensor?
I got the headman shorty's and so far so good but surface rust kicked in after first week so idk.I got them brand new like $180 so I hope it lasts...
You should not have to crack open any lines on the brake system to check just open up those couple of clamps holding the brake lines to the...
booster Whats happening is your brake fluid is getting pushed through the seal and into your brake booster and the rev and bog is caused by the...
yes thats the ignitor.is that a 20r in your truck? you should be able to get one off a 22r truck or just get an after market MSD.
I Mothers'ed my rims for Mothers Day.I asked my wife to help but she didn't find it that funny.
Are you getting power to the coil?I'm not sure of that years set up but I would start by checking power to the coil from your ign fuse.
Awesome project.I will be following this one for sure.
I wouldn't jump into NOS right away.You will need to upgrade your internals before you start popping NOS or else something will eventually...
Get some short stacks and go for it.Mild HP boost so can't go wrong there.
swap All correct and also I think you might need the mounting plate that mounts to the cross member.I've done a few 4 speed to 5 and a couple...
tortion Yeah you gotta drive it around and let it settle.Then make adjustments.
sides Sounds good to me.The Canon intake with the Mikunis is what most boys run out here.I have 40's in mine and they perform great.I just gotta...
cutting First pull the fenders off and get yourself some masking tape to use as your line.We got up as close as we could to the fire wall and...
Got the tires mounted on the truck(the correct way)and drove it around over the weekend.It rubs on a couple spots so I'm going to need to make a...
I have helped do a couple. a 5 speed trans would be best w50 i beleive it is.
Check this out.So yesterday I got the rear set of Boggers mounted and balanced.I can only do two at a time because all the weight in the back is...
Ok I'm canceling my first vote and now I second the motion for a set of Mikuni side drafts.I apologize for the inconvenience.
You need to look at your vin plate on the drivers side door frame.You will see it on the botttom right corner right above the Made In Japan.Here's...
Separate names with a comma.
