Get some friends and something for leverage....seriously no point in jacking up your back when a 6 pack of beer and a friend can fix the situation.
let the engine run to normal temp, the apply vacuum to the nipple on the EGR valve, if the engine runs like complete crap or stalls then its...
is the tank lower then the pump? like can fuel drain through the pump by gravity and go back into the tank? or is the top of the tank higher the...
Have you checked the fuses and fuel pump relay? Do you have a volt meter?
How much hp does that motor put out? cause if that motor is built lily it looks its like a 10k motors probably around 800 hp plus. An r154 goes...
Did the shaking start when you put these rims on? Have you tried rotating the tires and seeing if the vibration changes?
you are going to have problems with the shifter and your seats. The transmissions are so long ( im assuming you are useing an v160 ) the shifter...
Anything is possible...I don't think it has been done though. The entire firewall would be moved back and that doesn't leave a lot of room for...
No the turbo stuff is waay to big for a 94 22r, but if you are talking about a 94 supra and it has a 2jz in it then yes it will fit. Im looking...
sounds like fuel is draining back to your tank and loseing prime in the line. What fuel pump are you useing for your tank and where is it...
well you can ghetto it and just coil a coil or two off the front springs and install block out back. that would be the easiest, looking at my old...
not so we are chaseing nothing, have you tried jump starting the truck to make sure the battery has enough balls to turn that tiny motor over? if...
You have to or pretty rough with ujoints to get em out, but I've never had to cut caps before, that's a new one.
its supposed to be 8, i run mine at 14 and its drives way better.
If all 4 touched the pistons I would replace all 4
float is stuck down. take off the top 4 screws and clean out the float boal of junk
have you checked the signal wire to the starter to see if its getting power when you hit crank with the key? I would start there, if not signal...
mother of god.....i want it
Hey guys the truck is sold but the motor and other parts are still for sale, help me out and spread the word, i need this motor and stuff gone!...
Have you tried the parker line with their barb fittings? I loved those and had no leaks with 200+ psi on my fullsize. I had leaks from my valves,...
Separate names with a comma.
