so would I be able too buy stiffer shocks or would I have to get stiffer springs? I am bouncing all over the place on the 95 near Downtown Vegas....
I replaced the thermostat because the other one was stuck open. I thought that was the problem. driving around in 110 degrees is a little hot....
ok I will stay away from it. I did use seafoam in the gas tank because I was having a hard time passing smog. I know I need new piston rings and...
I was thinking head gasket as well. I did bleed the coolant yesterday and it seems to be fine. I also added a additive to the coolant that will...
I have been having a coolant issue ever since the Nevada sun started heating this hell hole past 100 degrees. First I replaced the stuck open...
I would like to go lower but I am so afraid of the front tires rubbing. I see these trucks with the tires tucked in or barely touching the fender....
yeah I only drove it around the block. I cut the bolts and they were very loose. I tightened them up and all is good
I lowered my truck by flipping the ball joints and torsions and took out the middle leaf. drove pretty good. 2.25" drop in front and 2.25" in...
So I plasti dipped my dash pieces black. Came out looking nice. Some black magic makes it look fresh. I guess I will post some pics. Finally...
It was a great time!!! Awesome trucks and sweet VW bugs.
I didn't put the bump stops back in so I put them back in and it fixed it
I stood mine up like so \_ then push down where the arm meets the hinge and back up. Mine were stuck on there good as well. I noticed it came off...
I will be there!!! I cannot wait!!
Open a photobucket and post it that way. It works all the time. I can't wait to see it. Why put a ford axle on it?
I like it!!! I would put it lower or just go all out and have it bigger on the whole glass. Or get it in that see thru sh*t they put on busses and...
Okay YOguyDA I will let you know. I am taking the side grills from an E34 and the lights. unfortunately the A/C thing is in the way. I might see...
What I did was wired the hood pin wire directly to the door switch and it works like a charm. but only if the driver side door is opened. lol. I...
it started to happen right after I lowered the torsion. So by doing that the bushings went? or what do i need to do?
After I lowered my front end with the torsions about 1.5 inch I hear crunching noises from big bumps or stopping hard. What could it be ? I also...
I just bought the same one. I know this is a thread from 2 years ago but I am having trouble connecting the dome light supervision. I open the...
Separate names with a comma.
