It has a custom made (entire) wood flat bed and "Yes" a complete air system. But, the dash controls are not in the best shape and missing all the...
Parting out a 1981 Toyota long bed. Engine / trans. / rear end already gone.
May look at a Holley 500 I think it would offer more air fuel flow than the Weber 38.
Purchased at "NAPA" but, most all auto parts stores have them, just make sure to get a good quality one that has a sealed casing. I guarantee...
Heats the water / anti-freeze which than rises to displace colder.
Here is what I did. Made a cardboard template, transferred it to a 1/8 steel plate, cut and ground to fit, used some high temp gasket material...
Here is what I did. Took a piece of cardboard outlined the facing, transferred it to a piece of 1/8 steel, cut and ground a plate to cover the...
Here is what I did. [IMG] [IMG]
I've used a "Hedman" for about 4 years now and have had no problems. At around $55.00 they are fairly cheap easy to install and have excellent...
Here is a great solution to the expensive stock ignitor box. http://bbs.zuwharrie.com/content/topic,85514.0.html
Here is a great and m.u.c.h cheaper alternative if your stock ignitor box should ever go out. http://bbs.zuwharrie.com/content/topic,85514.0.html
I'd recommend a rack and pinion system, saves weight with ease of steering effort. Any rack off a Geo Metro / Suzuki Swift or equivalent will do....
If you have any cold winters or are not using a choke here is the solution. For about $25.00 and an hours time this in line water heater is the...
I went with "Headman" fairly cheap ($55.00 if I remember right) with excellent fit. The only draw back is you will loose a bit of bottom end...
Here are a few pictures of my mechanical linkage solution. I got sick and tired of the carb linkage always needed attention so I took half a day...
"Yes" that is what I thought, but maybe different years have different bolt patterns.
I've been looking at a few wheel / tire combos in here and really like the Porsche wheel look. I was wondering what wheel year / size / offset /...
"Newbie" here and was reading your post. I was having the same problem with my stock linkage and finally got feed up and went to a cable type...
"Hello" from Missouri! This is a great little "Toyota" site that I've recently found. I'm currently working on a 1980 short bed with a later model...
Separate names with a comma.
