This is the drop I got in the front after torsion bar drop and 2 inch spindles
Hi does anyone make there own bumpstops can anyone give me some ideas and ways they made there's or any websites where they bought low profile...
I went to the Toyota dealership and bought them today for 18 dollars I gotta pick them up tomorrow I hope there the right ones
Wow Im glad that is over with ...all done now... It took me a day and a half just to get them off...and I didn't have to grind anything off ......
I got the passenger side off by cutting the top of the bolt then I was able to get a deep 22mm socket on the lock nut with a breaker bar then...
Ok thanks for all the feedback I'm going to try it again if it doesn't come off ill just cut it ✂️
Yea I'm going to go to the dealer to get new bolts sometime this week but I don't have a torch I don't think I can get a grinder on the bottom...
I've sprayed it with a lot of pub blaster it won't budge
Yea I've been trying with a 22mm wrench up top and a breaker bar on bottom with a 22mm deep well socket on bottom
Well I'm saying is it safe to cut off with grinder with that much pressure on the torsion bars even with the truck jacked up and a jack underneath...
Hi can anyone give me some good advice on how to get my torsion bar bolts to budge the lock nut won't move but the bolt does ... Can I just grind...
Sup dude
This is after i lowered it put a whole new front end on it put new wheels on it
When I first got it only had 114,000 miles on it and some idiot sprayed rustoleum bed liner all over it to prevent it from rusting
im new to the site just wanted to say hi
Separate names with a comma.
