if any one has one laying around and would like to sell let me know its for a 79
standardbyker88 thanks for the help when i do it i'll make a how to on older model bj flips
i'm really thinking bout just z'ing them and suporting them with some thick sheet metal but idk how safe it will be
how unsafe would it be to cut the dimple out so it would work or z the control arm
thanks i thought i did something wrong but everything is tight and pin is in the hole thanks and do you know how to do a bj flip on a 79 cause...
from the spindle to the top of the upper control was a 1/8inch gap and then i gave me a gap so what your saying its normal for it to happen sometimes
when replacing ball joints do they set down the same because i did my uppers and it gave me a 1/4 to 1/2 inch gap :confused:
sounds sweet
partstrain.com and lcengineering has some but they cost ya best thing to do is get a new rear end
pretty sweet
welcome to toyotaminis and i'm gonna be the first to ask wheres the pics
what rear gear are you guys running and how much mph gains from it also what is the stock gears for a 79 pickup 5 speed
put it in your glovebox and tuck your speaker wire under you carpet
thanks standardbyker i'm actual trying to find a job and get a weber so i dont have to worry bout it
well the F connector works and runs like it did i had to think of something before the part store closed so i can get to school tomorrow that...
the nipple broke off the vacuum control valve tonight and was wondering if you plug the hole and put a F shaped vacuum line adapter in would it...
i thinks todays high was like 40 and the truck hates it more than me
and all the dirt roads freeze up for like a week and they aint fun due to mountains
check all your vacuum lines and make sure there not clogged or disconnected
but it only stayed around for not even a day :(
Separate names with a comma.
