Its hard to tell, but it doesn't seem louder on the exhaust side. If anything it is louder on the Passenger's side. When I get a chance I will...
I wanted to see if i could isolate the rattle in a cylinder, so I pulled the plug wires one at a time while running to see if that would stop the...
Took a drive today to go get a cheesebuger and a big beer, Betsy did alright. There is a different rattle now, still sounds like it is coming from...
22reperformance doesn't have headers, but they have a wonderful selection of engine parts. I would put one of their engines up against LCE any day.
Aluminum shavings? have they passed the magnet test? If so, then yeah, there are few places aluminum can come from: timing cover and head. please...
Oh, dirty? My elbows need scrubbing pretty badly! Next time I will get some folks to do it for me and charge them a daily gym rate. Geeeeeez that...
I had planned on dropping the trans to get things sorted out with the flexplate spacers and install my transgo shift kit. After looking at the...
Funny, i'm in the oposite court. The front wouldn't look emaciated and need much of a drop if it was like the rear.
Oof it has been a long day. I was able to pull back the trans enough to take the flexplate off and switch the spacer. It only took 8 hours and...
Oh snap! Thats not a bad idea. I had considered ratchet straps in the back actually. I ended up using my floor jack in the back, and two bottle...
Hi all, I have to drop my A340e transmission and was wondering if y'all had any advice. The truck is currently a foot in the air on jack...
When I lived up in Mendocino and got my truck smogged they wanted proof of reaidency. I guess they have mich more leniant reatrictions than the...
She drove around the block! Started AND stopped on her own. I'm feeling so great. First trip will be to get a bottle of champagne to christen this...
They propose it every year, and every year it is denied, don't get your hopes up. We are more likely to get rid of Daylight savings than the...
Dang dude! That is looking mighty fine.
And I cheaped out, kinda. I ordered one from a local parts shop. This time I opted for the cast iron one. Still going with a 1" bore. It won't be...
Well, went to bleed the brakes today, but things weren't quite going right, so i went around checking to make sure the fittings were all tight,...
Makes me want to grow out the mutton chops again! Good times, good times
Heh, stomped on the brake pedal anyways, spayed brake fluid on my newly painted fenderwell. I guess it is just building character now haha.
Totally! I went to take her for a drive aroynd the block, but then remembered that I haven't hooked up the brake lines yet hahaha. Thanks hand...
Separate names with a comma.
