Lol! Way to crush his dreams :lol: I read a few treads where there using an older mustang tubular upper and lower control arms with a little...
Yeah I know lol that's why I need the front to be done
Yeah I knew there nothing for a Bolt on, I was more wondering what people are using for bigger breaks, and if there changing out the break master....
Well crap. I guess there no point of putting an LS motor in this if I can't stop it
I have a 77 toyota pickup and need to put bigger better breakes up front. Does anyone have a idea what I can replace these with?
a lot of work later, i got the middle peace tacked up and shaped up to the old fender, now i have to welded it up and sand it down smooth [IMG]
NOOOOOOOOO THE BED WAS CUT!!!!!!!!!!!!! :p [IMG] [IMG] [IMG] [IMG] A BEFORE [IMG] A AFTER [IMG]
275-50-15 on a 10in rim
Thanks
Thats the idea just no leafs
Im doing adjustable drag links with a adjustable wish bone. Im going to keep the top links at around 15 degress and the bottom links 0 to -5...
Leafs are going bye bye. Im thinking about to buy weld rt-s and get a different back spacing. The fame has to be narrowed and notched all the way...
yeah i dont want to cut the bed, well at less the outside, inside going to have to be cut a little for the notches and cross member
[IMG] [IMG] [IMG] so got the bed on with out cutting it but....... the lip of the bed is seating on the tires :brickknock: so i have...
This means a lot coming from you :D
Mine will be a 4.8ls with ls1 intake, 5.3 heads, ls6 cam and valve train and oil pump, fbody front ass, 70mm snail pushing 18 to 20 lbs. Water to...
No mods bolted right on, I know I'm going to have to cut the bed due to it being lowered
Narrow the back about two inches, four link, then lsx swap with a t56
[IMG] [IMG] [IMG] i have mighty max belltech 2 inch drop springs in the front and street taco four inch blocks in the back with middle...
I'm also going to be running viar 480s.
Separate names with a comma.
