So I spent some more money - [img] Callum
Width is your biggest issue, look at the S4 or S5 RX7 for the closest I know of. There could be others but the less you need to mod the better,...
NZ is relatively good for car mods and legality. Clear set of guidelines on what is legal without getting it inspected by an engineer (over 100mm...
If you want to follow some UZ builds, look at http://forums.minitruckin.co.nz/index.php or http://www.downundertruckin.com/ as they are a commonly...
Yeah we get Odyssey batteries but they aren't cheap at all, got a few options I'm investigating but I have only about 4 1/2 inches to fit them in....
Looking a little tidier today when I dropped the front panels off. [IMG] [IMG] [IMG] Currently sorting out battery options for mounting in...
Slowly getting re-assembled and made to look like a proper car again. Dropping off front guards, bonnet and bumper in the morning. [IMG] [IMG]...
Did a quick bit of googling and came up with this - As said above though the bellhousing is integral so you have to get the 3S Altezza one....
The tranny issue is just a matter of getting the right gearbox or bellhousing. The Altezza is a jap spec IS200 running the 3S-GE instead of the...
Oh yeah, no real problem to change. Just making them aware they need to add it to the list. Callum
You want to check on the sump and pickup though, the 4WD motors are setup to be mounted on an angle that is very different from the RWD 3S-GE...
If you want to do it look at Oz and NZ based forums, this conversion has been done a number of times to various vehicles. I would start witth...
Slowly reading my way through this whole build, awesome work. :applause: Callum
Yeah I currently have Toyota Altezza RS200 discs on it but haven't sorted caliper brackets yet, using Crown 5 stud hubs that have already been...
Saw an auction I couldn’t resist so now have some bigger brakes to play with. 4 pot calipers and 315mm discs from Toyota Celsior/Lexus LS400,...
There are some pics of parts from one here - http://homepages.ihug.co.nz/~filez/Toyota%204V.doc Will see about getting some other pics I have...
Fits in a Corolla too. [IMG] [IMG] Callum
Only ever fitted to the Toyota Century, from 1968ish to 1995 or 1997 when the V series (V was non hemi, then 3V (3l), 4V (3.4l) and 5V (4l) hemi...
Well I spot two motors in the background, both of which I own one of if my eyes are working ok. :cool: 3T-GTE twin spark 8 valve is 160hp, have...
The original conversion was actually done by a friend of mine who had it on the road for a few years before pulling it apart for a rebuild and...
Separate names with a comma.
