LOVE IT!! truck is sick bro!
judging by the tow hooks on the front of the frame, i have 6 1/2" clearance from the ground
new pics of the truck, pulled my fenders a little and lowered it another inch or so. looks pretty mean now. <a...
i got that part of it fixed, i just didn't have the rubber boots that go around the shifter back in place right and it just had enough pressure...
clutch will slip ALOT more in higher gears than in low gears like 1st or 2nd.
just replaced my clutch yesterday, same symptoms dude was having and my clutch pad and pressuse plate were hella worn. GOOD AS NEW!! :nana:
maybe, worst case anyway, it also could be your throwout bearing possibly.
rolling fenders. what da fuq does that mean??:thinking:
this book is a very good investment! it's worthevery penny it cost and will tell you anyting you need to know about the truck. i lucked out and...
take lots of pictures of those vacuum lines if you don't have a book on the truck!! crazy problems if you mix one up with the other! good luck!
just a thought... i seen a couple post on here where people are talking about doing a "ball joint flip." i understand that, it doesn't seem like...
care to elaborate a little?? i'm not exactly sure what you speak of homie.:drool:
naw, i ain't remove the shifter from the trans. actually i couldn't get it off! i know the bushing is still on the shifter handle i think it's...
naw man, i drive my truck hella carefully actually, i try to take care of it. i'm not sure but i may have damaged the bushing, idk i haven't...
the trans was rebuilt less than 6 months ago!! i have reciepts! EFF that!!! why did it just start when i changed my clutch?? that's the question i...
i lowered it with the torsion bars and it rode fine before i rememoved my bumpstops, now my steering just feels loose and on the highway it's...
man, my entire ride is already WAY off. and short of going with 4x4 fenders is there anything else i can do? i'm only lacking around 1/4" to...
ok, i got some clearance issues with my tires and the very edge lip of my fenders. is there a way i can get my wheels to camber in just a bit to...
yeah, and also while i was working on the yota today, after hitting myself in the hand with a BFH i removed my bump stops. and it RUINED the whole...
ok, so i just put a new clutch kit in my truck toady, just OE though. now my trans is popping outta first gear and outta 3rd too? :mad:what's the...
Separate names with a comma.
